How Menda Kicks Transforms Jerseys into Wearable Art Using Angelus Paints

Goal: Remove dirt, oils, and factory finishes so your paint can properly bond.

• Use Angelus Easy Cleaner with a soft brush or cloth. Scrub gently but thoroughly, especially around seams and textured areas.
• If the fabric has any kind of synthetic coating or glossy finish, lightly scuff it with fine sandpaper or a nail buffer.
• Let the surface fully dry before moving to the next step.

Pro Tip: Avoid saturating the fabric, use a damp cloth instead and gently wipe around the areas.

Goal: Keep the fabric soft and flexible after painting.

• Mix Angelus 2-Soft Fabric Medium with Angelus Acrylic Leather Paint in a 1:1 ratio.
• Apply thin, even coats using a brush or airbrush.
• Heat set with a heat gun or hair dryer once dry to the touch.
  

Pro Tip: You must heat-set each layer that contains 2-Soft before applying more coats of paint. Use either a heat gun or hair dryer to set up.

Patience is key! Allow each layer to dry fully before adding the next. This will help prevent any streaking or smudging and give you that buttery smooth finish.

***This step is optional***
Once your final coat is completely dry, seal the painted leather with Angelus 4-Coat or Acrylic Finisher. This step adds durability and protects your couch from wear and tear. Choose between matte, satin, or gloss depending on your desired finish.