Brick Leather Dye

Dyeing leather is different from painting—it soaks into the material rather than sitting on top like paint. The final color depends on the base color of the leather, so a white surface dyed with red will turn pink, not true red. Angelus Leather Dyes are designed to enhance and transform brown leather rather than lighten it. Keep this in mind when selecting your dye color.

DYEING SMOOTH LEATHER WITH ANGELUS LEATHER DYE

1. Prep by wiping down leather with leather preparer using our applicators, cotton balls, or a rag.

2. Wait for leather to dry a few minutes. Wipe down with microfiber towel to remove all lint.

3. Using Wool Daubers (One is supplied with each dye) soak the dye on the dauber.

4. Be careful of what you are dyeing. If you are dyeing a large spot use the dauber fully soaked. If you are doing a smaller section a paint brush or much less dye on the dauber may be required. 

5. Make sure to soak the article you are dyeing. Dye works by soaking into the item you are dyeing. It does not act like paint. Feel free to soak and evenly rub across to make sure all is even. 

6. Leave to dry. You may see a tint, bronzing, or any different finish. Do not panic! This is just residual dye on the surface.

7. (Optional) Wipe with a microfiber towel to remove excess dye pigment. If there is still a sheen or tint use some alcohol on said microfiber and wipe down quickly. Do not let the alcohol sit on the item or else you risk lifting some of the dye and discoloring. Once done the tint should disappear and it will just be the color. 

8. If you wish to dye the item more of the color complete steps 5-7 again. 

9. If you are looking to protect and nourish the leather we suggest using Angelus Leather Balm or Neutral Angelus Shoe Polish. If you do not want the shine of the shoe polish just lightly buff versus a full buff to shine. If you dyed the article a black or brown we would suggest even buffing with a colored shoe polish or Lustre Cream. 

‎

DYEING SUEDE WITH ANGELUS SUEDE DYE

1. Prep by cleaning the surface with a cleaning product like our Angelus Easy Cleaner Kit. It is necessary to get all the oils and dirt that may be sitting in or on the suede material. 

2. You cannot "SPOT TREAT" suede. Please make sure to fully wash/clean the entire surface to avoid water spots.

3. If the suede feels hard in texture, there is too much product in the material. Use a suede brush to loosen the suede. You can also use a soft bristle brush and water to pull out the cleaner. Let it dry, then you can continue.

4. Using Wool Daubers (One is supplied with each dye) soak the dye on the dauber.

5. Be careful of what you are dyeing. If you are dyeing a large spot use the dauber fully soaked. If you are doing a smaller section a paint brush or much less dye on the dauber may be required. 

6. Make sure to soak the article you are dyeing. Dye works by soaking into the item you are dyeing. It does not act like paint. Feel free to soak and evenly rub across to make sure all is even. 

7. Leave to dry for a few hours.

8. Using our Suede Kit brush or a strong bristled brush, break up the suede to bring it back to its natural feel. Be careful to not let residual dye get on other parts while brushing excess off. This will help the suede feel original again as well as remove excess dye so not run in case it gets wet.

9. (Optional)We highly recommend spraying down with our Water Repellent or Mink Oil Aerosol. Dyeing leather is different from painting—it soaks into the material rather than sitting on top like paint. The final color depends on the base color of the leather, so a white surface dyed with red will turn pink, not true red. Angelus Leather Dyes are designed to enhance and transform brown leather rather than lighten it. Keep this in mind when selecting your dye color.